Most western aircraft have engines that rotate clockwise when viewed from the cockpit. That's where torque comes into play.

As you throttle up your engine for takeoff, the right-turning direction of your engine and propeller forces the left side of your airplane down toward the runway. When the left side of the airplane is forced down onto the runway, the left tire has more friction with the ground than the right tire, making your aircraft want to turn left.

P-Factor

P-Factor, which is also called "asymmetric propeller loading", happens when the downward moving propeller blade takes a bigger "bite" of air than the upward moving blade.

This happens in two scenarios:

In both of these scenarios, your downward sweeping blade is at a much higher angle-of-attack than your upward sweeping blade. And with a higher AOA, the downward sweeping blade creates much more thrust (or lift), making your airplane want to yaw to the left.

Gyroscopic Precession

A spinning propeller is essentially a gyroscope, which is a spinning disc. That means it has the two properties of a gyroscope: rigidity in space, and precession. We won't make this next part a physics lesson, but we will quickly (and painlessly) explain precession.

Precession happens when you apply force to a spinning disc.

Here's how it works: you apply a force to one point of the disc, and the effect of that force (the resultant force) is felt 90 degrees in the direction of rotation of the disc.

For the most part, this only applies to tailwheel airplanes when they lift their tail off the runway during takeoff. As the tail comes up, a force is applied to the top of the propeller. And since the propeller is spinning clockwise, that force is felt 90 degrees to the right. That forward-moving force, on the right side of the propeller, creates a yawing motion to the left.

Spiraling Slipstream

Spiraling slipstream is the fourth and final left-turning tendency. It happens when your prop is moving fast and your plane is moving slow. And there's no better example of this than takeoff.

During takeoff, air accelerated behind the prop (known as the slipstream) follows a corkscrew pattern. As it wraps itself around the fuselage of your plane, it hits the left side of your aircraft's tail, creating a yawing motion, and making the aircraft yaw left.

Spiraling slipstream is, of course, dependent on an aircraft's design, as well the phase of flight you're in, so it's hard to quantify how much effect it really has on your plane. Here are a few pictures to help you visualize it.

Why You Need So Much Right Rudder

The four left-turning tendencies create the forces that make your airplane veer left during takeoff. Step on the right rudder to cancel them out, and you'll maintain a perfect centerline throughout your takeoff roll.

Improve your landings for less than the cost of a flight lesson.

Do you have a perfect takeoff and landing every time? Neither do we. That's why we built our Mastering Takeoffs and Landings online course.

You'll learn strategies, tactics, and fundamental principles that you can use on your next flight, and just about any takeoff or landing scenario you'll experience as a pilot.

Plus, for less than the cost of a flight lesson, you get lifetime access to tools that increase your confidence and make your landings more consistent.

Ready to get started? Click here to purchase Mastering Takeoffs and Landings now.