To: (Separate email addresses with commas)
From: (Your email address)
Message: (Optional)
Send
Cancel
Thanks!
Close
Have you ever felt uncomfortable flying into busy, unfamiliar airports? Here are some tips to get you prepared for your next trip to a busy Class B, C, or D airport.
Increased ATC requirements, complex taxi routes, and procedural differences can make these airports intimidating. But depending on where you're flying, it might be your best, or only, option.
When you've picked up flight following, ATC helps you out with traffic, weather, and airspace avoidance. ATC can help find routes that will keep you clear of heavy traffic. They can also warn you of traffic that's approaching your flight path. Navigation is still up to you, and you don't have to accept ATC's advice as long as you stay in Class E or G airspace. But following their advice can be a big asset.
The best way to work with ATC in airspace is to be proactive, and that includes flying into Class B, C, and D airports. When you let them know your destination on the initial call, ATC will coordinate your arrival.
As you get close to your destination airport, ATC will likely hand you off to a local approach control for that airport. If you're flying into a Class C airport and you're in two-way radio communication with ATC (they've said your callsign), you've been cleared into Class C Airspace. When you're flying VFR into Class B, you need to hear the words "cleared into the Class B airspace" from ATC.
Class B airspace has some of the most relaxed weather requirements because, in Class B, Air Traffic Controllers are tracking your every move - altitude, speed, and heading. It's the only type of airspace where this happens for all VFR aircraft, and because of it, controllers can allow you to fly in worse weather and still allow you to "see and avoid" other aircraft.
The requirements are very simple: 3SM visibility, clear of clouds. What does staying "clear of clouds" mean? It means that your airplane can operate up to, but not touch a cloud. That's pretty close.
Class C minimum weather requirements exist so that you can see and avoid other aircraft. ATC wants you to stay far enough away from the clouds so you can see and avoid other airplanes, especially jets flying fast approaches.
An easy way to remember VFR weather minimums for Class C airspace is the phrase "3 Cessna 152s". Day or night, each number in the phrase stands for one of the distances:
In both Class B and C airspace, you'll need a two-way radio, Mode-C or Mode-S transponder, and ADS-B out onboard your airplane to enter the airspace, so that you can maintain communication with ATC and so that they can track your location and altitude on their radar scope.
Having ATIS, approach control, tower, and ground frequencies loaded in your standby comm is always a good idea. Keep in mind that at many large airports, there are multiple frequecies for each service, depending on your arrival direction, or your location on the ground.
If you're using an EFB, which we highly recommend, load your destination airport page. All of the frequencies will be listed and available there for quick reference.
Flying into a Class C airport is usually no problem. However, you may be asked to hold outside of the airspace at some Class B airports during a busy arrival/departure block.
If you really need to (or want to) fly into a Class B airport, calling ahead might be a good idea. Call the local ATC Approach Control to ask when a good time to fly in might be, which will usually fall between blocks of departures and arrivals, or at night. Some airports like Salt Lake City and Phoenix have a lot of GA traffic, with one runway located near FBOs. Others, like Chicago O'Hare or New York LaGuardia, often won't be able to fit you into the traffic flow under normal operations.
Before your flight, or at least well before you begin descending, take a thorough look at the airport diagram. Find the FBO where you plan to park, and look at the runways/taxiways nearby. While you can never really plan out exactly how your approach/taxi will go, it's a good idea to familiarize yourself with the airport well ahead of time.
Airports are usually established as Class B or C due to increased traffic. That means busy frequencies and a lot of airplanes that are faster than you. Flying into these airports isn't the time to linger, take pictures, etc.
Keep your speed up as best you safely can, and anticipate flying either a long or short approach to landing. That's one way that ATC will sneak you in between faster jets. Don't rush yourself, maintain a sterile cockpit, and keep your eyes outside. If you need help, ask. The last thing you want to do is assume you understand an ATC instruction and create a traffic conflict.
Tell us about a time that you flew into a busy airport. What did you do to prepare? Did anything unexpected happen? Tell us in the comments below.
Want to learn more about airspace and radio communication? Sign up for our National Airspace System course here.
Swayne is an editor at Boldmethod, certified flight instructor, and a First Officer on the Boeing 757/767 for a Major US Carrier. He graduated as an aviation major from the University of North Dakota in 2018, holds a PIC Type Rating for Cessna Citation Jets (CE-525), is a former pilot for Mokulele Airlines, and flew Embraer 145s at the beginning of his airline career. Swayne is an author of articles, quizzes and lists on Boldmethod every week. You can reach Swayne at swayne@boldmethod.com, and follow his flying adventures on his YouTube Channel.